K Series IoT Board
AOYU K-3588S industrial mainboard
RK3588S
- Platform
- RK3588S
- CPU
- RK3588S Quad-core Cortex-A76 and Quad-core Cortex-A55, up to 2.4GHz
- DDR
- LPDDR4 4GB (8GB|16GB|32GB optional)
- Storage
- The default comes with an 32GB EMMC NAND chip that can scale up to 256GB
Overview
K-3588S industrial mainboard based on the RK3588S platform.
- Platform: RK3588S
- CPU: RK3588S Quad-core Cortex-A76 and Quad-core Cortex-A55, up to 2.4GHz
- DDR: LPDDR4 4GB (8GB|16GB|32GB optional)
Specifications
K-3588S
Hardware and interfaces
| Platform | RK3588S |
|---|---|
| CPU | RK3588S Quad-core Cortex-A76 and Quad-core Cortex-A55, up to 2.4GHz |
| DDR | LPDDR4 4GB (8GB|16GB|32GB optional) |
| Storage | The default comes with an 32GB EMMC NAND chip that can scale up to 256GB |
| LVDS | 30-pin industry-standard dual LVDS supporting VESA/JEITA format up to 1080P output |
| MIPI-DSI | 31-Pin FPC MIPI-DSI display port supporting up to 1920x1200 |
| HDMI Output | 1 HDMI 2.1 standard display interface supports up to 8K output |
| HDMI Input | HDMI 2.0/1.4b standard video input interface, up to 1080p@60Hz |
| EDP | 30-pin common FPC EDP supporting 1~2 lanes format up to 1080P output |
| HP/MIC | Support CTIA 4-pole HP/MIC socket (Left-Right-GND-Mic) |
| Line Output | Support standard left and right channel line output (pin header) |
| Amplifier output | 8 Ohm 6W Dual Audio Amplifier Output |
| MIC Input | Single-End MIC input (pin header) |
| Line Input | Support standard left and right channel line input (pin header) |
| USB Interface | 2 horizontal connectors (USB Host 2.0x1 and USB OTG 3.0x1), 1 TYPE-C socket, 6 pin headers (USB Hub 2.0x6, USB Host 2.0x1 and USB OTG 3.0 pinx1 reuse) |
| Serial Port | 2 TTL/RS-232/RS-485 compatible, 4 TTL/RS-232 compatible |
| Micro SD Card | Self-elastic micro SD card socket, up to 256GB capacity |
| Camera | Support USB camera within 8 million pixels |
| WIFI | Built-in high performance SDIO interface WiFi6 module, support IEEE 802.11 a/b/g/n/ac/ax, dual-band is configured by default. |
| Bluetooth | Built-in high performance serial interface BT module with support for V2.1+EDR/BT v3.0/BT v3.0+HS/BT v4.0/BT v5.0 |
| Ethernet | 1 port 10/100/1000M Adaptive Ethernet RJ45 connector + 4-Pin POE header |
| PCIE 4G/5G | Industry standard m-PCIE 4G module interface |
| Backlight Control | 1 port Industry standard LCD backlight control header, support for backlight switch and brightness adjustment |
| Infrared RC | Standard infrared receiver pin header |
| GPIO Signals | Up to 8-way GPIO signals for such as GPIO buttons and/or 3.3V digital input/output |
| I2C Bus | I2C pin header and FPC for I2C capacitive screen and etc |
| CLK Clock | 1 CLKO homologous clock signal |
| M.2 PCIE NVME Port | 1 Supports M.2 PCIE NVME SSDS, support for M.2 NVME 2280 SSDS |
| CAN Bus | 1 CAN pin headers for CAN Bus peripherals |
| Real Time Clock | Ultra-low-power RTC circuit (CR1220 battery) with timer and alarm functionalities |
| LED Indicator | Red LED indicator for standby and green LED indicator for running |
| Buttons | Recovery mode button and power switch button |
| DC Input | Supports 9~15V wide voltage DC power input |
| Ambient Requirement | Working temperature -20°C ~ 70°C, working humidity 0%~95% (non-condensing) |
| Physical Size | Length*Width*Height (135mm*93mm*9mm), PCB top side height 7.5mm |
| Operating System | Recommended Android 12.0, Linux Buildroot/Debian 11/Ubuntu-20.04 optional |
Explore similar models
AOYU K-3566 industrial mainboard
K-3566 industrial mainboard based on the RK3566 platform.
AOYU K0 industrial mainboard
K0 industrial mainboard based on the A40i platform.
AOYU K3 industrial mainboard
K3 industrial mainboard based on the RK3288 platform.
AOYU K4 industrial mainboard
K4 industrial mainboard based on the RK3399 platform.
AY-K-3588S
Request a quote
Thank you — your inquiry was sent.
We'll get back to you shortly. For urgent matters, reach us via WhatsApp or email.